HP Laserjet III, IV, V Easylabel Driver won't print below 11" on 8½" X 14" paper size (selection 2).

Work-around #1: Use the Windows Driver for that printer since it works correctly.
Work around #2: By using the CD and diskettes that come with the LaserJet printer, you must install the DOS Utilities. This would be found on the disk labeled DOS Utilities and DOS Printer Drivers. Run the file "INSTLJ" from the disk. You must also have the CD in the CD-ROM drive because the setup program looks for it. Select to Install DOS Utilities from the menu. Once installed, go to the directory where they were installed and type RCP at the DOS prompt. This will bring up a Printer Control Panel. Select "Legal" size for paper and click Send. The command is sent to the printer and EASYLABEL should now print correctly. If for some reason the printer gets unplugged or there is an electrical failure, this procedure must be repeated.